Iron Curves Kit (Available again late-Spring)

IRON CURVES- DIMENSIONS: 13 L x 7.25" D x 10.25" H. WEIGHT: 7 lbs.  MATERIAL: Black iron. VOLTAGE: 110 volts. BULBS: 2 x G125 Edison 40W or 60W incandescent  (included).  PRODUCTION TIME: Approximately two weeks. THE LAMP: Iron Curves, vintage but futuristic, is a beautiful lamp to display anywhere. Equipped with an on/off faucet handle and 2 large Edison bulbs, it's made from black iron and will last a lifetime. It includes our prewired faucet on/off switch and prewired light bulb fittings.. Our instructions will show you, step by step, the assembly process. Electrical components can be attached together with our included fittings so you don't have to be an electrician to wire your lamp. In addition, the wall plug is already attached to a fitting on the kit so you can attach it to the wires coming from your assembled lamp. If you select the optional dimmer module, under options above, we will install it on the lamp cord for you. Note: With a dimmer module, the lamp is limited to two 40W bulbs.This lamp on a scale of 1-10 requires a skill level of 5 or above. Lower skill levels can still complete the lamp but it might take additional construction time. The customer should know how to strip wire and be knowledgeable in the use of wire nuts. Our instructions will show you how to do this if you don't know how. Lower skill levels can still complete the lamp but it might take additional construction time. The customer should know how to strip wire and be knowledgeable in the use of wire nuts. Our instructions will show you how to do this if you don't know how. A wire stripper is included in your kit. A pipe wrench is also needed and may be purchased at very reasonable prices at Walmart or similar stores.